Google Analytics code integration

Hi all,
I want to show how you can integrate the Google Analytics code to your site.
Here the full instruction:
- Create new Google Analytics account and get javascript code for integration. (https://www.google.com/analytics)
- Find and open following file:
/templates/CURRENT_TEMPLATE/tpl/footer.tpl
- find following tag:

Code:

---

Only registered members can view the code.

---

and add the Google Analytics javascript code before tag,
also do not forget to place the following code line before Google code:

Code:

---

Only registered members can view the code.

---

and the following after Google code:

Code:

---

Only registered members can view the code.

---

- save changes and close the file

Then you should wait about 5-10 hours while Google detect javascript code in your site.
Please ask your questions here if you have some problems with integrations.

Hello Mike,

wonderful, it works perfect! :D

Thanks and regards,

Thomas

Just a quick update for anyone -- like me -- who stumbles upon this post. Google now recommends installing Analytics in the header, just before the </head> tag. So for best results, take everything that Mike F. said up above, and just move your Analytics code to the header.

Hi guys.

I can't find the </head> tag in footer.tpl. Should I follow the original instructions or am I looking in the wrong file or am I missing something?

Thanks,

Hemal

Quote:

---

Originally Posted by Hemal Ruparelia

Hi guys.

I can't find the </head> tag in footer.tpl. Should I follow the original instructions or am I looking in the wrong file or am I missing something?

Thanks,

Hemal

---

</head> tag is in the header.tpl file

Thanks mate. Yeah I would have thought that would be the logical choice and had a look there (looked again after reading your post).

But all I see in my header file is this:


{if $smarty.const.RL_LANG_DIR == 'rtl'} {assign var='text_dir' value='right'} {assign var='text_dir_rev' value='left'} {else} {assign var='text_dir' value='left'} {assign var='text_dir_rev' value='right'} {/if} {if $rss} {/if} {include file='js_config.tpl'} {rlHook name='tplHeader'} {$ajaxJavascripts}
{include file='blocks'|cat:$smarty.const.RL_DS|cat:'lang_se lector.tpl'}


{$lang.slogan_large}
{assign var='slogan' value=' '|explode:$lang.slogan_small} {foreach from=$slogan item='slogan_word' name='slogan'} {if $smarty.foreach.slogan.last} {$slogan_word} {else} {$slogan_word} {/if} {/foreach}
{include file='menus'|cat:$smarty.const.RL_DS|cat:'main_men u.tpl'}

I am a bit of a nooby so I might be missing something very obvious here.

Any ideas?

Again, the help is much appreciated.

Thanks

hmmm mines in the header.tpl ......what version software do u use and which template?

I use the realty spring (The latest version of Flynax)

Hi Hemal,

are you sure? I have had a look in the header.tpl of reality spring and found there the head tags without problems. Have you had a look in the correct tpl - file? You will find it in this folder:

/templates/yourtemplate/tpl

There you have to open the header.tpl file.

Best regards,

Cammie

Hey thanks Cammie,

That is the file I am looking at and this is verbatim what is on the header.tpl file:

{if $smarty.const.RL_LANG_DIR == 'rtl'} {assign var='text_dir' value='right'} {assign var='text_dir_rev' value='left'} {else} {assign var='text_dir' value='left'} {assign var='text_dir_rev' value='right'} {/if} {if $rss} {/if} {include file='js_config.tpl'} {rlHook name='tplHeader'} {$ajaxJavascripts}
{if $pageInfo.Key == 'home'} {include file='header_home.tpl'} {else} {include file='header_main.tpl'} {/if}

Think I might have to submit a ticket...

Thanks heaps anyway and let me know if you get any other ideas.

Hello Helman,

If you are not sure you can create a ticket with your request of curse. We will solve it ASAP.

Thanks Viktor,

Have done so.

Hemal

Quote:

---

Originally Posted by Hemal Ruparelia

Hey thanks Cammie,

That is the file I am looking at and this is verbatim what is on the header.tpl file:

{if $smarty.const.RL_LANG_DIR == 'rtl'} {assign var='text_dir' value='right'} {assign var='text_dir_rev' value='left'} {else} {assign var='text_dir' value='left'} {assign var='text_dir_rev' value='right'} {/if} {if $rss} {/if} {include file='js_config.tpl'} {rlHook name='tplHeader'} {$ajaxJavascripts}
{if $pageInfo.Key == 'home'} {include file='header_home.tpl'} {else} {include file='header_main.tpl'} {/if}

Think I might have to submit a ticket...

Thanks heaps anyway and let me know if you get any other ideas.

---

Hello Hemal,

You can try insert the Google code (as Mike told) after a code which you showed here. Thanks

To insert your analytics code, go to /templates/your-template/tpl/footer.tpl. Find the line

PHP Code:

---

Only registered members can view the code. 


---

around line 19. Insert after that line your code like this

PHP Code:

---

Only registered members can view the code. 


---

This works like a charm, good luck!

//Morgan

Hi, how can i add google analytics to my hosted software

Quote:

---

Originally Posted by Mike F.

Hi all,
I want to show how you can integrate the Google Analytics code to your site.
Here the full instruction:
- Create new Google Analytics account and get javascript code for integration. (https://www.google.com/analytics)
- Find and open following file:
/templates/CURRENT_TEMPLATE/tpl/footer.tpl
- find following tag:

Code:

---

Only registered members can view the code.

---

and add the Google Analytics javascript code before tag,
also do not forget to place the following code line before Google code:

Code:

---

Only registered members can view the code.

---

and the following after Google code:

Code:

---

Only registered members can view the code.

---

- save changes and close the file

Then you should wait about 5-10 hours while Google detect javascript code in your site.
Please ask your questions here if you have some problems with integrations.

---

If you have ftp login to the site, just follow the procedure above. If not file a ticket.

Morgan right,
You as hosted license owner should have access to the templates directory - its enough to paste the code.

For those who are looking how is better to add Google Analytics or other code:

We have plugin for convenient 3rd party codes management - it's <a href="http://www.flynax.com/plugins/verificationcode.html">Verification Code</a> plugin

I've done so and it looks like it SHOULD work. but when I log in to my Analytics account, it says "Tracking code not installed". I know your post says wait 5-10 hours, but it says on Google Analytics that it was last checked only a few seconds ago. then how come it doesn't detect it?

Note: I can see the javascript code in my web page when I look at the html code output to the browser.

Hi to all, maby can help me, because I use the Vertification code for first time, and I get the code from google analytics page. So I installed the plugin, and then I did go to the veritication code plugin, then I click on add a code, then set the name: Google_analytics . in the position I select footer, and then I only paste this code:

Quote:

---

<script>
(function(i,s,o,g,r,a,m){i['GoogleAnalyticsObject']=r;i[r]=i[r]||function(){
(i[r].q=i[r].q||[]).push(arguments)},i[r].l=1*new Date();a=s.createElement(o),
m=s.getElementsByTagName(o)[0];a.async=1;a.src=g;m.parentNode.insertBefore(a,m)
})(window,document,'script','https://www.google-analytics.com/analytics.js','ga');

ga('create', 'UA-80443024-1', 'auto');
ga('send', 'pageview');

</script>

---

Just that nothing else. And I leave checked sticky, however It past about 10 hours, and I don't see any page view in the analytics google page, Only the traffic test worked fine ( one visited ) but nothing else.
some one know what to do?

Can you try header instead of footer. I picked header and it works fine. The code looks fine to me

Hi to all.

For fix that problem I leave the Verification plugin enabled.

And I edit the tpl/footer.tpl and I add

PHP Code:

---

Only registered members can view the code. 


---

Now the google analytics works fine... without any problem.
I don't know why, but maby the plugin it's not working fine.
I din't try to put the plugin in the header position.

I just edit that file, and a few hours later the code worked fine for me.
Also I leave the plugin with that code enabled.

Hello , have problem with google analytics on flynax version 4.7.2 , google only finde subdirectory /blog not the flynax script. is that new rules of indexing from google and should remove the code from subdirectory or??

Alejandro andres Donato this code from you work properly olso to my version of the flynax 4.7.2